Repurposing furnishings will be a straightforward and rewarding DIY mission. Ashley Basnight of Handmade Haven exhibits how a fast coat of Varathane Premium wooden stain can remodel an outdated piece of furnishings into a lovely model new masterpiece.
Who doesn’t love bringing a furnishings piece again to life? After I first began running a blog, furnishings repurposing was truly how I obtained began. Refreshing a bit at all times introduced me a way of enjoyment, so I used to be tremendous excited to take it again to my roots and remodel this dresser.
Recently, I’ve been engaged on my main bedroom refresh and wanted a dresser to finish the look. Fortunately, whereas looking on-line, I used to be capable of finding this unimaginable piece of furnishings. I knew with a little bit love, it might be the right addition to my bed room.
I’m comfortable to stroll you thru the method of how I gave my dresser a refresh and hopefully it evokes you to mud off that outdated piece in your home!
Supplies Used
First, issues first, I needed to collect all the supplies I wanted to get this dresser trying nice once more.
Step 1: Furnishings Prep
As soon as I had all of my supplies gathered, it was time to prep the piece for stain. The very first thing I did was take away all the from the furnishings piece. I took off all the drawer knobs and took off the little steel casters on the underside.
It was evident that the dresser had some kind of prime coat and stain on it, so I knew I needed to strip the dresser fully down, in order that the brand new stain may adhere effectively to the furnishings piece. I first went in with my disc sander with 80-grit sandpaper to get the present end off.
I opted to make use of my disc sander as a result of they’re tremendous highly effective, they take the end proper off; you do need to be sure you are taking your time when sanding and never urgent right down to arduous, to stop rings in your furnishings, however the disc sander will get the job finished.
There have been a number of trim items on my piece and a few corners on the perimeters that I couldn’t get with my disc sander, so I used my Nook Cat Sander and Dremel MultiMax to get into these tight corners. I really like utilizing my Dremel as a result of it comes with so many cool attachments to assist with jobs like these.
As soon as I obtained all the end sanded off, I used to be amazed at how good the dresser seemed with the pure wooden, I nearly needed to go away it that means. I knew at this level that the mission was going to end up nice.
After sanding all of it down with 80-grit, I went again by and sanded it down with 220-grit sandpaper to clean out the floor.
Step 2: The Staining Course of
Now for the enjoyable half; the staining course of. It took me some time to determine which shade I needed to go together with at first, and I nearly went with weathered gray however determined that the Varathane Premium Darkish Walnut would go higher with my bed room decor.
The perfect half about this wooden stain is that it doesn’t require a wooden conditioner; a step I usually do when constructing furnishings. It additionally has a one hour dry time, which for me was interesting as a result of I can’t get my furnishings in the home quick sufficient as soon as its dry.
Earlier than staining. I made certain to blow off any sawdust from the sanding and wiped down the dresser with a humid rag after which let it sit to dry and I used to be able to get to staining.
Whenever you open your stain, you need to be sure that to stir it up very well. This may guarantee all the particles are blended effectively and also you’re prepared for software.
I opted to make use of a foam brush to use the stain as a result of it makes it very easy and fewer messy.
You’ll want to apply a pleasant coat in your piece. After I dipped the froth brush into the stain, I shortly observed that it was actually thick; I knew that the one coat protection was going to do the job.
After making use of the stain, I let it sit for round 5 min. The longer you let the stain sit, the richer the stain will probably be. After letting it sit, I used an outdated rag to wipe off the surplus stain. This step is essential; you need to be sure you don’t go away all the stain on the dresser. Or else your piece will probably be sticky and blotchy.
I went by in sections and utilized the stain everywhere in the dresser. I might stain one aspect after which wipe that aspect off and proceed to the following aspect. You need to be sure you apply your stain in sections, to make sure a pleasant even look.
As soon as I completed staining the outer a part of the dresser, I knew I had went with the fitting shade alternative. Varathane Premium Darkish Walnut stain was so wealthy.
After staining the outer a part of the dresser, I nearly went with the two-tone look as a result of the stain seemed so fairly with the pure wooden. However determined in opposition to it and commenced staining the drawers. The froth brush actually made the applying straightforward with the trim on the doorways.
After staining the dresser, I let it sit for an hour to dry and man was it trying good. I made a decision to place one prime coat of polyurethane for cover and added on some golden knobs to provide it a recent look.
The Transformation
This Varathane Premium wooden stain actually introduced my dresser to life and it appears wonderful in its new little nook. I really like how straightforward it was to rework this outdated piece and provides it a recent new look.
If you’re pondering of reworking an outdated dresser, Varathane Premium Wooden Stain can get the job finished.